Page 13

Kaup

Subject to alteration 11 General Information Toe-in KAUP clamps and fork positioners of the series T401Z, T411Z, T411BZ(I) and T411ZR are designed with a toein. This means, that the distance between the arms or forks (e.g. Bale Clamps, Brick Clamps, Fork Clamps) differs, measured on the tips of the arms compared to the rear side of the arms. The opening ranges given in our brochure are always measured at the rear of the arms. With an arm length of 1.000 mm the toe-in is approximately 30 mm (15 mm to each side). This is necessary to compensate the natural deflection of the clamping arms during transport. Without toe-in loads would be clamped at the rear side but would fall through at the tips. For handling sensitive goods such as television sets, Appliance Clamps and Carton Clamps with adjustable toe-in are available. Safety KAUP attachments correspond to the requirements of the valid EC regulations regarding quality, safety and technical documentation. All KAUP attachments with independent sideshift are equipped with components from our sideshift range T151P2. This means that they feature SOFTSTOP end-of-stroke slow-down to automatically throttle shifting speed over approximately the last 15 mm of sideshift stroke. This greatly improves truck stability when stacking at high levels. It also incorporates our SMOOTHROLL bottom hooks with compact rollers to save energy. Operation in explosion hazardous areas Many attachments from the KAUP range are, after appropriate modifications, suitable for operation in explosion hazardous areas. All these attachments are manufactured according to the ATEX standard 94/9 EG II 2G c IIB T4. Due to the complexity of the subject please contact your local distributor. Attachments in foundry version The foundry version for rotators features a closed fork carriage plate and a closed base plate as well as hydraulic hoses protected against heat. It is suitable to operate in applications with extreme high temperatures. Several other attachments are available in foundry version. If interested contact your local distributor Attachments in fishing industry version There are two types of KAUP Fishing Industry Rotators: The version T351.1S has 2 layers of sea water resistant paint (RAL 5005), galvanised screws and drill holes sealed with silicon. The version T351.1.3S has 3 layers of sea water resistant paint (navy gray), galvanised fork carriage and flange, galvanised screws, drill holes sealed with silicon and drainage for water. Several other attachments are available in fishing industry version. If interested contact your local distributor


Kaup
To see the actual publication please follow the link above